Multi-Rail RH modules
| Code | Dim. | STEP |
| RH-400 |  |  |
| RH-500 | | |
| RHC-FR1 | | |
| RHC-FR2 | | |
| RHC-FS1 | | |
| RHC-FS2 | | |
| RHS-S1 | | |
| RHS-S2 | | |
In Multi-rail RH system same type of modules are available than what ar used in Multi-Rail RM system. The most typical modules are listed in the table.
Multi-Rail RH applications
In a modular system, particular modules have specific functions, so that for machining of the workpieces of different material, form or size, different fixture modules can be chosen and installed independently from each other.
Multi-Rail RH System
Multi-Rail RH system is designed for heavy duty applications. When more than 6 tons clamping force is required or only M16 bolts can be used for installation, then our RH system can be considered instead of RM.
Compared to a traditional machine vise, the Multi-Rail RH system offers the following benefits:
- Using the components of the system, even the most challenging workpiece types can be machined.
- All sides of a workpiece can be machined with two setups
- Multiple workpieces can be clamped simultaneously
- The workpiece is safely fixed under all conditions
- It is also possible to clamp very large workpieces
Generally, all functions that are available in Multi-Rail RM are also availabele in Multi-Rail RH.
Compared to similar systems on the market, the OK-VISE Multi-Rail RH base is the most stable due to its steep serration profile. It has been designed for F-series clamp modules.
The pitch of the serration is 2,5 mm, and the size of the RM profile is 60 X 60 mm.
The accuracy from every serration to the first positioning hole is ± 0.02 mm.
