Clamps with grip jaw

This type of clamps posses two jaws with hard tungsten carbide coating : AK2-VT-DO, BK-VT-D, DK2-VT-D, DK2-VTI-D and FK2-VT-D.
When no clamping marks are allowed in the workpiece but still high friction is needed, these clamps are an excellent choise.
Or when thin-walled workpieces are being machined, these jaws create required holding force with less clampforce, preventing distorsions of the workpiece while clamping.

Code	Dim.	STEP
BK2-VT-SG
DK2-VT-SG
BK2-VT-G
DK2-VT-G

This types of clamps posses one or two serrared knife edge jaws.

Types xK2-VT-SG - where x stands for the size have the other jaw smooth, whereas in types xK2-VT-G both jaws are same type.

These models are equipped with n hard steel pins (n = 1...3 pcs), which increases the friction between the workpiece and the jaw.

Clamps with code ending on Gn (e.g. DK2-VT-G2) contain n pieces of grip pins in both jaws. In clamps with code xK2-VT-RGn one jaw is serrated and hardened. Other jaw combinations are available upon request.

Code	Dim.	STEP
BK2-VT-G1
BK2-VT-G2
BK2-VT-G3
DK2-VT-G1
DK2-VT-G2
DK2-VT-G3
FK2-VT-G1
FK2-VT-G2
FK2-VT-G3
Combo models
BK2-VT-RG1
BK2-VT-RG2
BK2-VT-RG3
DK2-VT-RG1
DK2-VT-RG2
DK2-VT-RG3
FK2-VT-RG1
FK2-VT-RG2
FK2-VT-RG3

Clamp DK2-VT-RG3 (D-size with 3 grip pins in one jaw) is shown in the photo below.