Components (generic)

This is a locator bushing used in many types of platform where OK-VISE components are employed.
See also Threads and positioning holes on platforms

Assembly tools are also available. For example, SP-AT-16 is used for the D=16 springs.

Code	STEP
BE-12-18
BE-16-25
SP-12-n
SP-16-n

Fixture keys are used to position components on T-slot tables or blank platforms.
The other half ( with "widht2" ) goes into OK-VISE modules, and is kept standard.
Normally widht2 is 18 mm

If keys are to be used in Mult-Rail base rails, then a machining option M-T1 is available, which is 2 + 2 pockets like shown in the photo.

Below there are the most typical components commonly used with the OK-VISE products.

M5, M8, M12 and M16 hex nut bolts are used with the low-profile clamps. Standard hex nut bolts are normally operated with an allen key.

Code	Total L	Positioning L	Dimensions
OKSB12-35	39 mm	23 mm
OKSB12-45	45 mm	23 mm
OKSB12-65	65 mm	43 mm
OKSB16-55	55 mm	28 mm

Shoulder bolts are used for accurate positioning of the components.

Code	Lenght	Head	Max force	STEP
PPB	30 mm	Serrated, tilting	18 kN
PPB-1	8,5 mm	Serrated, tilting	18 kN
PPB-2	17 mm	Serrated, tilting	18 kN

One family of gripper pads is fastened with M12 thread

PPB

Standard DIN508 T-slot nuts can be used in some T-slot table applications.

Please note that Standard DIN508 T-slot nuts can not be used in Multi-Rail systems.